- Fanless processing device optimized for continuous operation
- Mass memory on industrial Compact-Flash
- External power supply 230V AC
- 1x EIB/KNX port with direct connection through clips
- 2x serial ports configurable for RS232 or RS485
- 1x serial port RS232 9 pins
- 4x USB ports
- 2x Ethernet ports
Technical sheet Rack
When many systems have to be integrated in the same building, Rack is the ideal solution. With a lot of external ports to connect different systems or devices, the Rack grants the highest performance and the best automation for the smart building. It embeds all the features of the other ThinKnx server models without restrictions.
It allows to control the Philips Hue lights from KNX bus. In the ThinKnx system different rules can be created to control Hue elements (lights or groups) from KNX and to receive feedbacks from them.
It allows the bidirectional connection of MyHome BTicino plants to KNX plants. Through easy-to-fit tables it is possible to set matching among the messages coming from the two worlds.
It allows the bidirectional connection of Lutron plants to KNX plants. The integration allows to associate KNX groups to Lutron lights, making the devices in the Lutron plant controllable from KNX buttons or supervision.
Transforms ThinKnx server into a Z-Wave controller allowing the complete management of Z-Wave nodes and full integration with every ThinKnx functions.
It allows to generate reports that can be sent via mail in listing and graphical form. The server can also collect data that can be consulted in real-time directly from the user interface through interactive and responsive charts.
It allows to manage audio and video devices installed in the plant. It enables also the serial gateway and Ethernet gateway features that allows to create custom commands for interfacing with most of the devices on the market.
Full web page
All Light controlled elements plus Security (Alarm devices), generic buttons, Scenes, HVAC controller, RGB, Cameras.
Direct KNX connection
Linux-based appliance with direct connection to the KNX bus (no need of separate IP-router).
An unlimited number of clients (PCs, smartphones or tablets) can simultaneously connect to the server.
Unlimited KNX data-points
There aren't limitations on the number of KNX entities that can be controlled by our servers.
There are different kinds of switches available: on/off normally open, on/off normally close, on on pressure/off on release, on on pressure, value on pressure, etc.
The lights can be easily dimmered through a simple interface of the client app.
RGB leds can be controlled through KNX.
Rollers and blinds contains KNX groups to move, to stop and to obtain a feedback of shades, blinds, etc.
Heating & Cooling
The chronothermostat is used to interact with a KNX thermostat and allows to set weekly timers to control the temperature. The desired temperature can be hourly and daily set.
Switching can be temporized using two modes: the “Calendar” mode allows to set complex temporizations while the “Switch Schedule” mode allows to set six weekly temporizations.
Weather forecast can be displayed into the client application.
The loads control allows to monitor the electric energy consumption following disarm thresholds and rearm intervals.
Scene is a sequence of programmed actions such as the switching on of the lights in a room. This list of action can be predetermined by the user through the scene recording function.
Logics & Math
Logical operations (AND, OR, XOR) and mathematical functions based on values coming from KNX groups can be created using simple and intuitive interfaces.
Visualize analogical values in the client interface (for example meteo data such as wind speed, outdoor temperature, etc.) and to send them to a KNX group (for example to adjust threshold values).
Visualization of IP cameras with MJPEG or RTSP video flow.
Service that allows to send SMS notifications when specific conditions predefined in the ThinKnx Configurator occur (no additional hardware required).
It is possible to perform actions depending on a command or a specific value sent by the KNX bus (or other integrated systems), for example it is useful to create temperature alarms.
Management of technical alarms with push notification messages (iOS), email and automatic page change in the ThinKnx client interface.
Integration of IR TRANS devices to control TVs, Blurays, Apple TV, etc. directly from ThinKnx client interface (no database required).
Light web Page
Through web interface you can control switches, rollers and blinds, comfort objects (Chronotermostats), analog values.
Report until 20MB
It allows to collect data up to 20 MB from KNX plants (both locally and on the cloud), to generate reports and to continuously store KNX telegrams (logger modality).
It allows to control, in a bidirectional and fully configurable way, Sonos players.
It allows to manage audio and video devices installed in the plant. It enables also the serial gateway and Ethernet gateway features that allows to create custom commands to interface with most of the devices on the market.
DoorCom and PBX
It allows ThinKnx clients to receive VoIP calls coming from devices with VoIP technology, such as: VoIP telephones, IP intercoms (TCS, 2N, Mobotix).
Enables also the VoIP PBX (SIP Server) function that handles VoIP calls on the server.
It allows to manage the interface with external systems that do not use the KNX protocol and enables also the Ethernet gateway.