Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
access_control [2019/11/20 16:23]
ingrid [Application 1: Hospitality]
access_control [2019/12/11 08:56] (current)
ingrid [How it works?]
Line 4: Line 4:
     * [[#​phase_1:​_Thinknx_configurator| Phase 1: Thinknx Configurator]]     * [[#​phase_1:​_Thinknx_configurator| Phase 1: Thinknx Configurator]]
     * [[#​phase_2:​_Management| Phase 2: Management]]     * [[#​phase_2:​_Management| Phase 2: Management]]
-  * [[#​application_1:​_hospitality| Application 1: Hospitality]] +  * [[#​application_1:​_Offices| Application 1: Offices]]
-    * [[#​how_it_works?​| How it works?]]+
  
 ===== Solution Overview ===== ===== Solution Overview =====
Line 13: Line 12:
 <WRAP center 60%> <WRAP centeralign>​ Figure 1: Access Control Usability </​WRAP> ​ </​WRAP>​ <WRAP center 60%> <WRAP centeralign>​ Figure 1: Access Control Usability </​WRAP> ​ </​WRAP>​
  
-The Access Control object can communicate directly with the KNX system ​because of the bus connector on the Thinknx server, making the integration very easy and flexible. Any standard KNX keypad can be used as an access keypad, and the buttons as code entries. Once the code is inserted, ​any lock or switch ​connected to a KNX actuator ​can be operated. In addition, communication with Wiegand technology is possible through the Thinknx-Wiegand adapter, making it possible to install a suitable RFID or biometric reader.+The Access Control object can communicate directly with the KNX system ​through ​Thinknx server, making the integration very easy and flexible. Any standard KNX keypad can be used as an access keypad, and its buttons as code entries. Once the code is inserted, ​it is possible to operate a lock or switch ​on a KNX actuator. In addition, communication with Wiegand technology is possible through the Thinknx-Wiegand adapter, making it possible to install a suitable RFID or biometric reader.
  
 {{ :​access_control_diagram.png?​direct&​900 |}} {{ :​access_control_diagram.png?​direct&​900 |}}
Line 113: Line 112:
   - Save the code. A new entry will show in the table above with the added information. The admin will be able to edit this entry or delete it altogether.   - Save the code. A new entry will show in the table above with the added information. The admin will be able to edit this entry or delete it altogether.
  
-===== Application 1: Hospitality ​===== +===== Application 1: Offices ​=====
-The Thinknx Access Control brings more value to the Hospitality sector, ​ enhancing the overall experience of the guests while maintaining communication between the different systems installed. Using the Thinknx server, the automation in guest rooms can be based on any technology supported by the server such as KNX, Zwave, Modbus, and more. The hotel can also take advantage of the fully fledged application proposed by Thinknx, which will be branded with the content from the hotel and used by the guests to control the different gates as well as explore all the facilities and amenities.+
  
-{{ :​access_control_hotels1.png?​direct&​900 |}} 
-<WRAP center 60%> <WRAP centeralign>​ Figure 4: Access Control - Hospitality </​WRAP> ​ </​WRAP>​ 
  
-==== How it works? ====