alarm_device

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
alarm_device [2019/03/20 17:04] – external edit 127.0.0.1alarm_device [2019/10/21 19:12] – [Alarm device] ingrid
Line 51: Line 51:
      * Passphrase: Encryption passphrase used during panel configuration.      * Passphrase: Encryption passphrase used during panel configuration.
  
 +==== Object Commands ====
 +After adding an alarm device to the system, it is possible to send a number of commands when using other objects such as the Generic Command button. 
 +
 +<WRAP centeralign>{{ :gen_cmd_5.png?400 | Security }}</WRAP>
 + 
 +After selecting **Security** from the tree, a list of all the alarm devices and centrale added in System will be shown. The available commands when selecting one of the devices are the following:
 +
 +++++Arm a particular partition with a specified code|  This command will allow to arm one partition using its related pin code.
 +  * **Partition Number**
 +  * **Pin Code**
 +++++
 +
 +++++Disarm a particular partition with a specified code|  This command will allow to disarm one partition using its related pin code.
 +  * **Partition Number**
 +  * **Pin Code**
 +++++
 +
 +++++Arm all partitions with a specified code|  This command will allow to arm all partition using a common pin code.
 +  * **Pin Code**
 +++++
 +
 +++++Disarm all partitions with a specified code|  This command will allow to disarm all partition using a common pin code.
 +  * **Pin Code**
 +++++
 +
 +++++Switch ON or OFF the specified output|  This command will allow to control a particular output on the alarm system.
 +  * **Number of the output to switch**
 +  * **New /state of the output** ON=1, OFF=0.
 +++++
 +
 +=== Centrale ===
 +After selecting **Security** from the tree, a list of all the alarm devices and centrale added in System will be shown. The available commands when selecting one of the devices are the following:
 +
 +++++Arm a particular partition with a specified code|  This command will allow to arm one partition using its related pin code.
 +  * **Partition Number**
 +  * **Pin Code**
 +++++
 +
 +++++Disarm a particular partition with a specified code|  This command will allow to disarm one partition using its related pin code.
 +  * **Partition Number**
 +  * **Pin Code**
 +++++
 +
 +++++Arm all partitions with a specified code|  This command will allow to arm all partition using a common pin code.
 +  * **Pin Code**
 +++++
 +
 +++++Disarm all partitions with a specified code|  This command will allow to disarm all partition using a common pin code.
 +  * **Pin Code**
 +++++
 +
 +++++Switch ON or OFF the specified output|  This command will allow to control a particular output on the alarm system.
 +  * **Number of the output to switch**
 +  * **New /state of the output** ON=1, OFF=0.
 +++++
 ==== Bentel Interface ==== ==== Bentel Interface ====
  
  • alarm_device.txt
  • Last modified: 2023/02/27 13:57
  • by ingrid