lm_input_knxinput

It represents an input coming from the KNX bus.

  • Input type: the datatype of the value to read from KNX.
  • KNX group: the KNX group address.
  • Value at startup: policy to determine which value to assign to the input at the beginning of the execution of the logic scheme.
    • ’Read current value’: indicates that the input starting value is equivalent to the value of the KNX group.
    • ’Wait for a new telegram’: indicates that the input doesn’t take any value until the receiving of a new telegram.
    • ’0 until first telegram’: indicates that the input takes value 0 until the receiving of the first telegram.
    • ’1 until first telegram’: indicates that the input takes value 1 until the receiving of the first telegram.
  • lm_input_knxinput.txt
  • Last modified: 2019/03/20 17:04
  • by 127.0.0.1