main_cons_ui

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
main_cons_ui [2023/05/04 11:31] – [User Interface] ingridmain_cons_ui [2023/05/04 11:33] (current) ingrid
Line 169: Line 169:
  
 {{ :conf_license.png?direct&300 |Accessing the license editor}} {{ :conf_license.png?direct&300 |Accessing the license editor}}
-<WRAP center 60%> <WRAP centeralign> Figure 12: Accessing the license editor </WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 14: Accessing the license editor </WRAP>  </WRAP>
  
 {{ :conf_licenses.png?direct&600 |Licenses editor}} {{ :conf_licenses.png?direct&600 |Licenses editor}}
-<WRAP center 60%> <WRAP centeralign> Figure 13: License editor </WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 15: License editor </WRAP>  </WRAP>
  
-With the UP configurator version 1.3.0.16, the standard licenses are automatically selected based on the server model configured in the System tab. Any additional license added to the server will have to be manually selected in the optional licenses section as seen in figure 13.+With the UP configurator version 1.3.0.16, the standard licenses are automatically selected based on the server model configured in the System tab. Any additional license added to the server will have to be manually selected in the optional licenses section as seen in figure 15.
  
 \\ \\
Line 182: Line 182:
  
 {{ :figura2.png?direct&600 |Not supported device for selected licenses warning}} {{ :figura2.png?direct&600 |Not supported device for selected licenses warning}}
-<WRAP center 60%> <WRAP centeralign> Figure 14: Not supported device for selected licenses warning </WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 16: Not supported device for selected licenses warning </WRAP>  </WRAP>
  
  
Line 196: Line 196:
  
 {{ :conf_users.png?direct&600 |Users and groups editor}} {{ :conf_users.png?direct&600 |Users and groups editor}}
-<WRAP center 60%> <WRAP centeralign> Figure 15: Users and groups editor</WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 17: Users and groups editor</WRAP>  </WRAP>
  
  
Line 238: Line 238:
  
 {{ :conf_add_user.png?direct&600 | Add a new user to a group}} {{ :conf_add_user.png?direct&600 | Add a new user to a group}}
-<WRAP center 60%> <WRAP centeralign> Figure 16: Add a new user to a group </WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 18: Add a new user to a group </WRAP>  </WRAP>
  
 \\ To export the user information or share them by email or QR code, click on the User Data Summary button. A new window will open allowing you to enter the email addresses you wish to share the information with or export the file as PD by clicking on the Export PDF button. A QR code is also available and can be scanned directly from the Thinknx application to download the project automatically with the correct user profile. \\ To export the user information or share them by email or QR code, click on the User Data Summary button. A new window will open allowing you to enter the email addresses you wish to share the information with or export the file as PD by clicking on the Export PDF button. A QR code is also available and can be scanned directly from the Thinknx application to download the project automatically with the correct user profile.
  
 {{ :conf_user_summary.png?direct&600 | View and export user information}} {{ :conf_user_summary.png?direct&600 | View and export user information}}
-<WRAP center 60%> <WRAP centeralign> Figure 17: View and export user information </WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 19: View and export user information </WRAP>  </WRAP>
  
  
Line 252: Line 252:
  
 {{ :figura13.png?direct&500 |Restrictions editor for functions/pages/objects}} {{ :figura13.png?direct&500 |Restrictions editor for functions/pages/objects}}
-<WRAP center 60%> <WRAP centeralign> Figure 18: Restrictions editor for functions/pages/objects </WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 20: Restrictions editor for functions/pages/objects </WRAP>  </WRAP>
  
  
Line 274: Line 274:
  
 {{ :figura24.png?direct&500 |Protection PIN editor}} {{ :figura24.png?direct&500 |Protection PIN editor}}
-<WRAP center 60%> <WRAP centeralign> Figure 19: Protection PIN editor </WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 21: Protection PIN editor </WRAP>  </WRAP>
  
  
Line 324: Line 324:
 Write groups have just one address. For each write group address, it is possible to disable the sending on the KNX bus by either ticking the option inside the ETS window, or by placing an asterisk before the group address. This will allow the user to run a simulation mode where it is possible to change the status of this group without generating a traffic on the KNX bus. The group will only be seen on the KNX monitor of the Thinknx server. Write groups have just one address. For each write group address, it is possible to disable the sending on the KNX bus by either ticking the option inside the ETS window, or by placing an asterisk before the group address. This will allow the user to run a simulation mode where it is possible to change the status of this group without generating a traffic on the KNX bus. The group will only be seen on the KNX monitor of the Thinknx server.
 {{ :conf_knx.png?direct&700 |Disabling the sending on the bus}} {{ :conf_knx.png?direct&700 |Disabling the sending on the bus}}
-<WRAP center 60%> <WRAP centeralign> Figure 20: Disabling the sending on the bus </WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 22: Disabling the sending on the bus </WRAP>  </WRAP>
  
 {{ :conf_knx2.png?direct&700 |Disabling the sending on the bus}} {{ :conf_knx2.png?direct&700 |Disabling the sending on the bus}}
-<WRAP center 60%> <WRAP centeralign> Figure 21: Disabling the sending on the bus </WRAP>  </WRAP>+<WRAP center 60%> <WRAP centeralign> Figure 23: Disabling the sending on the bus </WRAP>  </WRAP>
  
  
  • main_cons_ui.txt
  • Last modified: 2023/05/04 11:33
  • by ingrid