Differences

This shows you the differences between two versions of the page.

--- proj_creation [2019/04/17 16:39] – [Project Creation] ingrid
+++ proj_creation [2019/04/18 11:21] – ingrid
@@ Line 11: / Line 11: @@
   * **Step 1** Enter the project name without spaces or diacritic signs (mandatory).
-{{ :pro_man_-_figura3.png?direct&500 |New project button and wizard first step}}
+{{ :proj_creation_new_proj.png?direct&500 |New project button and wizard first step}}
 <WRAP center 60%> <WRAP centeralign> Figure 1: New project button and wizard first step </WRAP>  </WRAP>
@@ Line 17: / Line 17: @@
   * **Step 2** Select the server type (mandatory) and enter the device serial number (optional); go to the next phase by clicking on ”Next” or conclude the wizard by clicking on ”End”; all the following steps are optional .
-{{ :pro_man_-_figura4.png?direct&500 |Step 2: server selection}}
+{{ :proj_creation_select_server.png?direct&500 |Step 2: server selection}}
-<WRAP center 60%> <WRAP centeralign> Figure 2: Step 2: server selection </WRAP>  </WRAP>
+<WRAP center 60%> <WRAP centeralign> Figure 2: server selection </WRAP>  </WRAP>
   * **Step 3** Enter IP address to connect to the server using the local network or host name and port (if different from the predefined one) to use remote connection.
-{{ :pro_man_-_figura5.png?direct&500 |Step 3: connection settings}}
+{{ :proj_creation_enter_ip.png?direct&500 |Step 3: connection settings}}
-<WRAP center 60%> <WRAP centeralign> Figure 3: Step 3: connection settings </WRAP>  </WRAP>
+<WRAP center 60%> <WRAP centeralign> Figure 3: connection settings </WRAP>  </WRAP>
   * **Step 4** The name and even the geographic coordinates of the location where the server is installed should be typed in this section. These data will be used on clients when the geolocalization feature is active. These settings are mandatory if the sun calculator object is added to system. Check the box ”Enable Time Server” to use the server as time and date source for KNX devices. Server will synchronize with NTP time server if an internet connection is available.
-{{ :pro_man_-_figura6.png?direct&500 |Step 4: server location settings}}
+{{ :proj_creation_location.png?direct&500 |Step 4: server location settings}}
-<WRAP center 60%> <WRAP centeralign> Figure 4: Step 4: server location settings </WRAP>  </WRAP>
+<WRAP center 60%> <WRAP centeralign> Figure 4: server location settings </WRAP>  </WRAP>
   * **Step 5** If the plant will be managed by different users and different user interfaces for each user has to be created than it is necessary to create users and groups to be used for export policies. It is possible by clicking on the ”Edit” button to access the users editor window. For more details about users creation refer to [[main_cons_ui#users_and_groups|this section]].
-{{ :pro_man_-_figura7.png?direct&900 |Step 5: users creation for restrictions}}
+{{ :proj_creation_users.png?direct&900 |Step 5: users creation for restrictions}}
-<WRAP center 60%> <WRAP centeralign> Figure 5: Step 5: users creation for restrictions </WRAP>  </WRAP>
+<WRAP center 60%> <WRAP centeralign> Figure 5: users creation for restrictions </WRAP>  </WRAP>
@@ Line 43: / Line 43: @@
   * **Step 6** Selecting the active licences for the project permits that configurator checks while exporting whether objects and functions configured into the project will properly work once the project will be exported and uploaded on the server. In fact, if the project contains objects that are not included in licences purchased by the customer, they will not be working in the real installation.
-{{ :pro_man_-_figura9.png?direct&900 |Step 6: project active licenses editor}}
+{{ :proj_creation_license.png?direct&900 |Step 6: project active licenses editor}}
-<WRAP center 60%> <WRAP centeralign> Figure 6: Step 6: project active licenses editor </WRAP>  </WRAP>
+<WRAP center 60%> <WRAP centeralign> Figure 6: project active licenses editor </WRAP>  </WRAP>