Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
system_objs [2020/04/07 13:27]
ingrid [Z-Wave Controller]
system_objs [2020/04/17 10:53] (current)
ingrid
Line 1219: Line 1219:
  
   * **IP Address** IP address of the device or of the serial server   * **IP Address** IP address of the device or of the serial server
-  * **Port Number** Serial port number. ​It can be between ​0 and 3. For USB use 10+  * **Port Number** Serial port number ​that changes depending on the server used: 
 +      * Compact: use 0. 
 +      * Rack: for the 2 RS-232 ports use and 1. For the additional green ports use 2 and 3
 +      * Brickbox: for RS-232 use 4. For RS-485 use 5. 
 +      * When using a USB port, use 10.
   * **Lights** Collection of lights   * **Lights** Collection of lights
   * **Automation** ​   * **Automation** ​
Line 1600: Line 1604:
 This object represents the interface between ThinKnx system and a third-party device connected through serial port. It makes possible to send commands through the serial port to the device. This object represents the interface between ThinKnx system and a third-party device connected through serial port. It makes possible to send commands through the serial port to the device.
  
-  * **Port Number** Serial port number. ​It can be between ​0 and 3. For USB use 10.+  * **Port Number** Serial port number ​that changes depending on the server used: 
 +      * Compact: use 0. 
 +      * Rack: for the 2 RS-232 ports use and 1. For the additional green ports use 2 and 3
 +      * Brickbox: for RS-232 use 4. For RS-485 use 5. 
 +      * When using a USB port, use 10.
   * **Baud Rate** Serial port baud rate.   * **Baud Rate** Serial port baud rate.
   * **Data Length** Number of bits for data.   * **Data Length** Number of bits for data.
Line 1861: Line 1869:
      * IP address: Device IP address.      * IP address: Device IP address.
      * Port number: TCP/IP port number for ethernet connection.\\ If the property ”Use serial port” is set to ”Enabled”,​ the following property will be displayed:      * Port number: TCP/IP port number for ethernet connection.\\ If the property ”Use serial port” is set to ”Enabled”,​ the following property will be displayed:
-     * Serial port: Server serial ​port number.+     * Serial port: Serial ​port number ​that changes depending on the server used: 
 +      * Compact: use 0. 
 +      * Rack: for the 2 RS-232 ports use 0 and 1. For the additional green ports use 2 and 3. 
 +      * Brickbox: for RS-232 use 4. For RS-485 use 5. 
 +      * When using a USB port, use 10.
  
 ==== Object commands ==== ==== Object commands ====
Line 1898: Line 1910:
     * IP address: Device IP address.     * IP address: Device IP address.
     * Port number: TCP/IP port number for ethernet connection.\\ If the property ”Use serial port” is set to ”Enabled”,​ the following property will be displayed:     * Port number: TCP/IP port number for ethernet connection.\\ If the property ”Use serial port” is set to ”Enabled”,​ the following property will be displayed:
-    * Serial port: Server serial ​port number.+    * Serial port: Serial ​port number ​that changes depending on the server used: 
 +      * Compact: use 0. 
 +      * Rack: for the 2 RS-232 ports use 0 and 1. For the additional green ports use 2 and 3. 
 +      * Brickbox: for RS-232 use 4. For RS-485 use 5. 
 +      * When using a USB port, use 10.
   * **Mute KNX Group** KNX group for mute command.   * **Mute KNX Group** KNX group for mute command.
  
Line 1941: Line 1957:
     * //TV brand LCD//     * //TV brand LCD//
     * //TV brand NEC//     * //TV brand NEC//
-  * **Serial port** ​Server serial ​port number.+  * **Serial port** ​Serial ​port number ​that changes depending on the server used: 
 +      * Compact: use 0. 
 +      * Rack: for the 2 RS-232 ports use 0 and 1. For the additional green ports use 2 and 3. 
 +      * Brickbox: for RS-232 use 4. For RS-485 use 5. 
 +      * When using a USB port, use 10.
  
 ==== Object Commands ==== ==== Object Commands ====
Line 1983: Line 2003:
     * IP address: Device IP address.     * IP address: Device IP address.
     * Port number: TCP/IP port number for ethernet connection.\\ If the property ”Use serial port” is set to ”Enabled”,​ the following property will be displayed:     * Port number: TCP/IP port number for ethernet connection.\\ If the property ”Use serial port” is set to ”Enabled”,​ the following property will be displayed:
-    * Serial port: Server serial ​port number. +    * Serial port: Serial ​port number ​that changes depending on the server used: 
 +      * Compact: use 0
 +      * Rack: for the 2 RS-232 ports use 0 and 1. For the additional green ports use 2 and 3. 
 +      * Brickbox: for RS-232 use 4. For RS-485 use 5. 
 +      * When using a USB port, use 10.
  
 ==== Object commands ==== ==== Object commands ====