https://www.thinknx.com/wiki/ 2026-10-14T14:21:13+00:00 https://www.thinknx.com/wiki/ https://www.thinknx.com/wiki/lib/tpl/bootstrap3/images/favicon.ico text/html 2026-07-22T09:00:58+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=access_control&rev=1784703658&do=diff ViaVai Access Control new! Solution Overview The Thinknx Access Control object permits to enhance the level of automation and security of the home/building where it is applied. It can be adapted to sectors where long term expirations are required such as service and industry sectors, but also applies to the hospitality sector where credentials are usually short term, and remote management is required. text/html 2023-02-27T13:57:05+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=alarm_device&rev=1677502625&do=diff Alarm device Alarm Object This object is used to integrate the central alarm in the project; it allows the server to arm or disarm the central, to read partitions or sensor status and to singularly control them. All alarm panels integrated in the system provide the user with the same graphical effect; they can be selected from the following list of models: text/html 2023-03-21T10:41:33+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=audiofy&rev=1679391693&do=diff Audiofy 2.0 - The Hub of Home and Building Automation upgradable to Micro Server upgradable to Micro Server Introduction Audiofy is not only a professional audio multi-room system but your all-in-one solution for the complete control of home and building automation. Just with one device you can stream music contents from internal players or analog stereo inputs and manage in the same time all the functionalities of Thinknx supervision system from lighting and heating & cooling, to audio … text/html 2026-09-22T08:38:27+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=bacnet&rev=1790059107&do=diff   BACnet [BACnet] The Thinknx system allows the integration of devices and data points through the BACnet protocol, enabling bidirectional communication with external systems and the import of data into the supervisor. Through this object, it is possible to configure BACnet communication, acquire the available points and use them for control, visualization and integration with other systems, such as KNX. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=ch4&rev=1553097883&do=diff Project Management A project can be defined as a folder containing all the configuration files related to a specific plant and all the settings needed to reconstruct user interface and system logics. New projects can be easily created directly using the Configurator software. Previously existing projects can be imported and edited (they can be renamed, optimised, deleted, etc). text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=ch5&rev=1553097883&do=diff System Objects System Object This object is the main node of the system tree and includes all the main features and data that describe the project. All other objects, which represents the configurable services provided by the server, can be added to the project by right clicking on this node.$\uparrow$$\downarrow$$\rightarrow$$\leftarrow$ text/html 2026-06-04T15:00:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=energy_manager&rev=1780578007&do=diff Energy Manager [Energy Manager] The Energy Manager object in Thinknx allows the creation of a complete system for monitoring and managing energy flows within the installation. This includes data collection from different sources, such as grid, photovoltaic production, storage and loads, their graphic visualization and the processing of historical and real-time statistics. text/html 2026-02-20T11:04:13+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=faq&rev=1771581853&do=diff Thinknx FAQ Getting Started What is a Thinknx server and how does it work? Thinknx server is a universal supervisor for building automation that can communicate with multiple protocols such as KNX, Modbus, Lutron, etc, and allows you to control them from a single customizable and user-friendly application available on all platforms. text/html 2021-03-17T11:52:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=flash_fix&rev=1615978344&do=diff How to fix Flash Player EOL for Windows Since many customers are still using our old platform that needs Flash Player to properly run, here we give a short guide to set back functionality of Thinknx Configurator Classic and Thinknx Player Classic. text/html 2026-05-14T10:23:34+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=generic_commands&rev=1778747014&do=diff Internal Commands & Status When an object is added to the System, a list of all the commands related to this object will be accessible, if applicable. These commands can be used on a generic button, inside the logic module, with the universal gateway, etc. Some objects, like Sonos Manager, will also allow you to read statuses from the devices by using an Analog Value interface object or an Extended Command$\uparrow$$\downarrow$$\rightarrow$$\leftarrow$ text/html 2026-09-10T11:01:17+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=gw_manager&rev=1789030877&do=diff System architecture and limits [ System architecture ] Maximum number of Home Gateways for each ThinKnx server: PICCOLO and K2: 1Other servers: 5 Maximum number of ZigBee devices for each Home Gateway: For each Home Gateway: 60 If the application requires to manage a higher number of Home Gateways per ThinKnx Server or a higher number of ZigBee devices per Home Gateway, please contact the technical assistance service for a deeper feasibility analysis. text/html 2026-05-14T09:15:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=hot_topics&rev=1778742924&do=diff Hot Topics Trend Line Overview The Trend Line is designed for seamless integration with the KNX system, offering essential functionalities quickly and easily. It serves as the perfect entry-level solution for residential buildings, apartments, or hospitality environments. Key devices in the Trend Line, such as K and K2, feature built-in standalone servers, enabling control of the KNX system via a mobile application without the need for a Pro Line server. Other devices, such as Piccolo, functio… text/html 2019-10-07T11:38:26+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=ifttt&rev=1570441106&do=diff Thinknx IFTTT Guide What is IFTTT and why should you use it?IFTTT StructureStart with IFTTTThinknx and IFTTT Sending an action from Thinknx to IFTTT Inside Thinknx Configurator Inside IFTTT account Sending an action from IFTTT to ThinknxExample 1: Thinknx to IFTTTExample 2: IFTTT to Thinknx What is IFTTT and why should you use it? IFTTT is an initialism for If This Then That. It is a free web-based service to create chains of simple conditional statements, called applets. An applet i… text/html 2026-06-04T12:37:09+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=import_knx_project&rev=1780569429&do=diff KNX Project Import (ETS Project) [KNX Project Import] Starting from version 1.4.4 of the Thinknx Configurator, it is possible to directly import a KNX project exported from ETS in .knxproj format. This feature is designed to speed up system configuration, allowing already defined group addresses to be reused and drastically reducing the need for manual entry. text/html 2025-09-17T11:09:58+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=integration_kit&rev=1758100198&do=diff Thinknx Integration Kit A downloadable version of this document is available here. The purpose of this document is to illustrate how to integrate third party systems with Thinknx servers and its functionalities. Integration can be on different levels depending on the structure of the plant, required system reliability and internet connection availability. Here follows the possible integration scenarios: text/html 2026-06-22T12:50:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=inter_objs&rev=1782125449&do=diff Interface Objects Pro Line new! new! Trend Line: These objects, divided into functions, pages and objects, compose the client application GUI. Please refer to the ”User Interface” section. Each object allows the user to check the system status and control the integrated elements. All these objects shares the following text/html 2020-01-28T08:40:23+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=knxnet_ip&rev=1580197223&do=diff Thinknx Server with KNXnet/IP Interface Introduction Enabling KNXnet/IP on the server allows you to program and connect to the KNX bus over IP. In addition to the normal operation of the server as a visualization tool, and depending on the configuration, it can be used as a: text/html 2019-04-01T13:36:15+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=licensing&rev=1554118575&do=diff Adding a License to a Thinknx Server Step 1 Copy the license code received upon your purchase. [ License Code ] Step 1: License code Step 2 Log in to your server by inputting ip_address:5051 into your web browser. [ Server Webpage ] Step 2: Server Webpage Step 3 Enter your login credentials (default username: service, default password: password). text/html 2026-09-21T12:07:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_analog_comparator&rev=1789985230&do=diff Comparator / 2 Points Regulator [Comparator / 2 Points Regulator node] The Comparator / 2 Points Regulator node compares two numeric input values and generates a logic output according to two configurable thresholds. The node calculates the difference between Input 1 and Input 2: $$Difference = Input\ 1 - Input\ 2$$ The output is then determined as follows:$$Difference = Input\ 1 - Input\ 2$$$$Difference > Threshold\ for\ ON$$$$Difference < Threshold\ for\ OFF$$$$Threshold\ for\ OFF \leq Di… text/html 2026-09-21T12:35:35+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_analog_pid&rev=1789986935&do=diff PID Controller [Comparator / 2 Points Regulator node] The PID Controller (Proportional-Integral-Derivative Controller) is an analog control node used to regulate a process and maintain a measured value as close as possible to a desired target value. The controller continuously compares the text/html 2026-09-21T12:45:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_analog_pwm&rev=1789987554&do=diff Pulse Width Modulator The Pulse Width Modulator node converts an analog input into a pulse signal where the ON/OFF ratio depends on the modulated value of the Input connector. The node computes the ratio between the Input value, the Input Min. property and the text/html 2026-09-21T12:55:08+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_analog_ramp&rev=1789988108&do=diff Ramp The Ramp node increases or decreases in a linear way the value of the Output connector until it reaches the value of the Input connector. The linear increment consists of adding (or subtracting) to the Output a value represented by the Step size text/html 2026-09-21T13:01:41+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_analog_range&rev=1789988501&do=diff Range Verifier The Range Verifier node checks whether the analog value of the Input connector is included between two threshold values defined by the Threshold Min. and Threshold Max. properties. If the input value is within the configured range, the node sends text/html 2026-09-21T13:14:28+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_analog_thermostatauto&rev=1789989268&do=diff Thermostat 4 Pipes The Thermostat 4 Pipes node is used to manage heating and cooling regulation in systems equipped with separate heating and cooling circuits. The node receives the room temperature, setpoint, deadband and operating mode as inputs and calculates the corresponding heating and cooling thresholds. text/html 2026-09-21T14:04:57+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_analog_thermostatsetpoint&rev=1789992297&do=diff Thermostat Setpoint & Thermostat Setpoint Reverse The Thermostat Setpoint and Thermostat Setpoint Reverse nodes are used to encode and decode KNX thermostat setpoints using datapoint type DPT 275.100. DPT 275.100 contains four thermostat setpoint values inside a single 8-byte datapoint. text/html 2026-09-21T14:08:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_analog_thres&rev=1789992481&do=diff Threshold Filter The Threshold Filter node limits an analog value according to one or two configured thresholds. When the value applied to the Input connector is included between Threshold Min. and Threshold Max., the same value is sent to the Output text/html 2026-09-21T14:14:36+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_analog_time_filter&rev=1789992876&do=diff Time Base Filter The Time Base Filter node processes an analog value received from the Input connector by applying a configurable computation method to a set of samples before sending the result to the Output connector. The node can operate on a fixed number of samples or, when the text/html 2025-03-19T13:51:33+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_comment&rev=1742388693&do=diff Comment Node It allows users to add textual notes within the workspace to improve clarity and organization. text/html 2026-09-21T14:21:41+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_counter_maintcounter&rev=1789993301&do=diff Maintenance Counter The Maintenance Counter measures the total time during which the Input connector remains equal to 1. The accumulated time is expressed according to the Time UoM property and is sent to the Output connector when the Input receives a falling edge, when an text/html 2026-09-21T15:38:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_counter_statcounter&rev=1789997911&do=diff Statistic Meter The Statistic Meter reads the numeric value received on the Input connector and calculates accumulated totals for different time periods. The node provides values for the current and previous day, week, month and year. The calculated values are persistent and are therefore preserved when the server reboots. text/html 2026-09-21T14:33:19+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_counter_updowncounter&rev=1789993999&do=diff Up/Down Counter The Up/Down Counter increases or decreases its internal counter according to rising edges received on the Increment and Decrement input connectors. A rising edge on Increment increases the counter by one, while a rising edge on Decrement text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_input_intstatus&rev=1553097883&do=diff System Status It represents an input coming from a status of a System object in the Configurator. For example, a feedback coming from Sonos. System status: the system status to read. To edit this property, click on the right button of the property text field. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_input_knxinput&rev=1553097883&do=diff KNX Input It represents an input coming from the KNX bus. Input type: the datatype of the value to read from KNX.KNX group: the KNX group address.Value at startup: policy to determine which value to assign to the input at the beginning of the execution of the logic scheme. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_input_number&rev=1553097883&do=diff Constant Value It represents a constant inside the block diagram. It can be a number, a bit or a string. Value: the value assigned to the constant. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_input_sheetinput&rev=1553097883&do=diff Sheet Input text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_and&rev=1553097883&do=diff And The And node sends 1 on the output only when all the inputs are 1. text/html 2026-09-21T15:56:18+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_filter&rev=1789998978&do=diff Filter The Filter node forwards a value received on the input connector to the output connector according to the behaviour defined by the configured properties. The node can: block one or both input values;force a specific output value;invert the input; text/html 2026-09-21T15:58:46+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_if&rev=1789999126&do=diff IF The IF node evaluates the value of the Condition input and selects which value must be sent to the output. if Condition is equal to 1, the value present on the True value input is sent to the output;otherwise, the value present on the False value text/html 2026-09-21T16:04:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_lmatrix&rev=1789999494&do=diff Logic Matrix The Logic Matrix node provides a configurable number of inputs and outputs. The number of input connectors is defined by the Number of inputs property, while the number of output connectors is defined by the Number of outputs property. text/html 2026-09-21T16:01:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_lrelay&rev=1789999314&do=diff Latching Relay The Latching Relay node sends 1 to the output when the Set input is set to 1 and sends 0 to the output when the Reset input is set to 1. When both Set and Reset are equal to 0, the previous state of the output is maintained. The Behaviour text/html 2026-09-21T16:06:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_memory&rev=1789999605&do=diff Memory Module The Memory Module is used to store a value received on the Input connector and send it to the output only when a dedicated trigger condition is activated. The value received on Input is stored internally by the node, but it is not immediately propagated to the output. text/html 2025-03-18T14:02:59+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_nand&rev=1742302979&do=diff Nand The Nand node is the opposite of the And node, sends 0 on the output only when all the inputs are 1. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_nor&rev=1553097883&do=diff Nor The Nor node is the opposite of the Or node, sends 1 on the output only when all the inputs are 0. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_not&rev=1553097883&do=diff Not The Not node accepts just one input, it inverts the value of the input. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_or&rev=1553097883&do=diff Or The Or node sends 1 on the output when at least one input is equal to 1. text/html 2026-09-21T16:12:58+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_prelay&rev=1789999978&do=diff Pulse Relay The Pulse Relay node sends 1 to the output when the Set input is set to 1 and sends 0 to the output when the Reset input is set to 1. When both Set and Reset are equal to 0, the previous state of the output is maintained. Whenever the text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_xand&rev=1553097883&do=diff Xand The Xand node sends 1 on the output only when all the inputs are equal. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_logic_xor&rev=1553097883&do=diff Xor The Xor node sends 1 on the output when the inputs don't have the same value. text/html 2025-03-18T11:13:09+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_abs&rev=1742292789&do=diff Absolute Node The Absolute node, computes the absolute value of the given input value and sends the result to the output connector text/html 2025-03-18T12:47:28+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_add&rev=1742298448&do=diff Add Node The Add node, computes the addition of n input values and sends the result to the output connector text/html 2025-03-18T13:06:56+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_avg&rev=1742299616&do=diff Average Node The Average node, computes the arithmetic mean of n input values and sends the result to the output connector text/html 2025-03-18T13:09:46+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_div&rev=1742299786&do=diff Division Node The Division node, computes the division of two inputs and sends the result to the output connector text/html 2026-09-22T15:30:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_expression&rev=1790083824&do=diff Math Expression The Math Expression node evaluates a mathematical or logical expression defined through the Expression property. For general information about the expression editor, refer to Configuring an expression. After the expression has been defined, every variable used inside it automatically becomes an input connector of the node. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_linearcomb&rev=1553097883&do=diff Linear Combination The Linear Combination node, given n Input connectors, each one with a load assigned, it computes the linear combination and sends the result to the Output connector. $$C = \sum_{i=1}^n {input_i load_i} = input_1 load_1 + input_2 load_2 + ... + input_n load_n $$ The load value is set through the Load property of each Input text/html 2025-03-18T13:16:22+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_log&rev=1742300182&do=diff Logarithm Node The Logarithm node, computes the logarithm given two inputs, which represent base and argument of the logarithm, and sends the result to the output connector text/html 2025-03-18T13:18:32+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_max&rev=1742300312&do=diff Max Node The Max node, given n inputs, it sends to the output the maximum value among the inputs text/html 2025-03-18T13:24:23+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_min&rev=1742300663&do=diff Min Node The Min node, given n inputs, it sends to the output the minimum value among the inputs text/html 2025-03-18T13:27:28+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_mul&rev=1742300848&do=diff Multiplication Node The Multiplication node, computes the absolute value of the given input value and sends the result to the output connector text/html 2025-03-18T13:36:26+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_pow&rev=1742301386&do=diff Pow Node The power node, computes the exponentiation given two inputs, which represent base and exponent, and sends the result to the output connector text/html 2025-03-18T13:41:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_remainder&rev=1742301712&do=diff Remainder Node The Absolute node, computes the division of two inputs and sends the remainder to the output connector text/html 2025-03-18T13:45:41+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_round&rev=1742301941&do=diff Round Node The Round node, given an input, it rounds the value to the closest integer and sends it to the output connector text/html 2025-03-18T13:59:12+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_math_sub&rev=1742302752&do=diff Subtract Node The Subtract node, computes the subtraction of n input values and sends the result to the output connector text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_output_command&rev=1553097883&do=diff Command It represents the command to be executed when a value on the input connector is received. Trigger It determines the behaviour of the node for the command execution:On trigger If selected, a new Trigger input connector is added to the node, which executes the command whenever the connector value is 1 (or 0 if the connector is inverted) text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_output_knxoutput&rev=1553097883&do=diff KNX Output It represents the KNX group on which the value will be sent. KNX group: the KNX group address.Output type: the datatype of the value to write on KNX. text/html 2026-09-22T16:09:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_scripting&rev=1790086194&do=diff Scripting Node The Scripting Node allows users with basic programming knowledge to freely define custom operational logic using code. To configure the node, the script must be written using the integrated IDE and then executed by the Logic Module. text/html 2025-03-25T14:23:27+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_sheet&rev=1742909007&do=diff Sheet Input, Sheet Output & Logic Module Sheet The Sheet Input and Sheet Output nodes are used to create generic logic functions that can be reused across multiple KNX projects. They replace actual KNX inputs and outputs, allowing you to save internal logic as an independent text/html 2025-03-18T14:21:21+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_timer_converter&rev=1742304081&do=diff Time Converter When receiving an input in the form of a time or a date, the system splits the information into separate output components. text/html 2026-09-21T11:56:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_timer_onoffdelay&rev=1789984567&do=diff On/Off Delay [On/Off Delay node] The On/Off Delay node applies separate delays to the activation and deactivation of a logic signal. When the Input connector changes from 0 to 1, the node waits for the configured ON delay before sending 1 to the Output connector. When text/html 2026-09-21T16:22:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_timer_pulsegen&rev=1790000569&do=diff Continuous Pulse Generator The Continuous Pulse Generator node continuously generates a digital pulse sequence while the value of the Gate connector is equal to 1. The duration of the ON state is defined by the Factor for ON property, while the duration of the OFF state is defined by the text/html 2026-09-21T16:29:57+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_timer_pulsetrain&rev=1790000997&do=diff Pulse Train Generator Whenever a rising edge is received on the Input connector, the Pulse Train Generator node generates a sequence of pulses on the Output connector. The duration of the ON state is defined by the Factor for ON property, while the duration of the OFF state is defined by the text/html 2026-09-21T16:41:14+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_timer_random&rev=1790001674&do=diff Random Pulse Generator The Random Pulse Generator node generates a sequence of digital pulses with random ON and OFF durations for all the time the value of the Gate connector is equal to 1. The random ON time is included between the values defined by the text/html 2026-09-21T16:43:36+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_timer_schedpulse&rev=1790001816&do=diff Scheduled Pulse The Scheduled Pulse node generates a pulse at a specific time of the day when the value of the Gate connector is equal to 1. The execution time is defined by the Scheduled Time property, while the pulse duration is determined by the text/html 2026-09-21T16:51:17+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_timer_stairwell&rev=1790002277&do=diff Stairwell Timer The Stairwell Timer node manages a timed digital output. When the Input connector receives the value 1, the node sends 1 to the Output connector and starts a timer. When the configured time expires, the node sends 0 to the Output text/html 2026-09-22T11:20:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=lm_timer_stopwatch&rev=1790068801&do=diff Stopwatch The Stopwatch node measures elapsed time and provides two different operating modes, defined by the Trigger policy property: Switch — the Stopwatch counts while the Input connector is equal to 1 and pauses when it returns to 0.Toggle — the Stopwatch starts on the first rising edge received on text/html 2026-06-15T16:42:28+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=log_manager&rev=1781534548&do=diff Log Manager The Log Manager allows the user to record, organize and view the events generated by the Thinknx system. The configuration is carried out from the Configurator, where it is possible to choose which types of logs to enable, create custom categories and define events to be recorded according to specific sources and conditions. text/html 2026-09-21T11:30:06+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=logic_module&rev=1789983006&do=diff Logic Module Each logic scheme consists of a sheet containing different functional blocks, called nodes. Each node corresponds to a specific function executed by the Thinknx server. The behavior of a node is determined by its connectors, which represent its inputs and outputs. Nodes can be linked together through connections: each connection starts from an output connector and ends at an input connector of another node. text/html 2026-07-01T12:06:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=main_cons_ui&rev=1782900409&do=diff Thinknx Configurator new! Software Download There are currently two versions of the Thinknx Configurator: Thinknx Classic version 1.2.25Thinknx UP version 1.3.0.8, which is an updated version of Classic with many additional features. To view the new features introduced with Thinknx UP, see text/html 2020-01-15T13:58:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=migration_to_thinknxup&rev=1579093087&do=diff Migration to Thinknx UP IntroductionWhat's new?General updatesObjects upgradesHow to migrate? Introduction Thinknx UP is a completely redesigned version of the Classic Thinknx software. It includes additional features for the system integrator and the end user. In order to use Thinknx UP, it is important to update both Thinknx Server and Thinknx Client as seen in the table below: text/html 2026-09-16T11:02:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=modbus&rev=1789549344&do=diff Modbus The Modbus protocol enables data exchange between automation devices over serial or Ethernet communication. Through the Gateway Modbus and Gateway Modbus Slave objects, the Thinknx server can read and write Modbus values, make them available to the supervision system, and exchange them with the KNX system. text/html 2022-08-23T08:58:17+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=mqtt&rev=1661237897&do=diff MQTT Integration MQTT is an open standard messaging protocol for the Internet of Things (IoT). It is designed as an extremely lightweight publish/subscribe messaging transport that is ideal for connecting remote devices with a small code footprint and minimal network bandwidth (source: text/html 2026-06-22T16:01:27+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=multisite&rev=1782136887&do=diff Multi-site The Multi-site function allows multiple Thinknx servers installed in different locations to be managed through a single centralized project. This function is designed for distributed installations, such as retail chains, shopping centers, corporate offices, separate buildings, or configurations consisting of multiple local servers. Each site retains its own Thinknx server, while a text/html 2024-10-28T14:41:26+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=pbx_doorcom&rev=1730122886&do=diff Voip PBX & Doorcom Every Thinknx server embeds a software VOIP telephony PBX. It is optimized for the VOIP functionalities between clients and for door communication. This object allows to configure the PBX (extensions, ring groups and door stations). text/html 2023-10-12T13:16:06+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=port_numbers&rev=1697109366&do=diff Ports Configuration Compact The below numbers should be used inside the Configurator when using one of the ports on the Compact: RS-232 (DB9): use 0.USB: use 10. [Compact's DB9 Serial Port] Compact's DB9 Serial Port Pin Signal Name Type 1 DCD Data Carrier Detect text/html 2026-06-22T12:59:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=portal&rev=1782125988&do=diff Thinknx Portal Introduction Thinknx Portal is a tool provided by Thinknx Cloud dedicated to system integrators as well as end-users. Its main goal is to monitor and control single installations as well multiple ones such as multi-branch retail stores or companies, clusters of villas or chain hotels. It allows all the installed servers to be virtually connected regardless of their physical location, and controlled from a centralized user interface. text/html 2024-05-28T12:09:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=proj_creation&rev=1716890984&do=diff Project Creation Project Definition The Thinknx project created inside the Configurator is defined as a folder containing all the configuration files and settings related to the user interface and system logic for a specific plant. All files imported in the project (such as ETS, images, etc.) are copied and stored in the project folder. text/html 2023-04-11T12:55:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=proj_deploy&rev=1681210500&do=diff Project Deployment Project Deployment When a project is completed it has to be deployed on the server and the various clients. When the project is modified, even slightly, it is important to transfer it to the server and to the clients. If the project version on the server does not match the version on the client, the application will not work correctly. text/html 2019-03-20T17:04:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=proj_man&rev=1553097883&do=diff Project Management A project can be defined as a folder containing all the configuration files related to a specific plant and all the settings needed to reconstruct user interface and system logics. New projects can be easily created directly using the Configurator software. Previously existing projects can be imported and edited (they can be renamed, optimised, deleted, etc). text/html 2026-07-22T08:58:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=qr_code_access_control&rev=1784703527&do=diff QR Code Access Control The QR Code Keypad function allows Thinknx Up to be used as an access control keypad. When the QR Code associated with an access point is scanned, Thinknx Up automatically opens the keypad for the configured project and checker. The user can then enter their PIN to request access. text/html 2026-10-01T11:08:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=quickguide&rev=1790845683&do=diff Thinknx Quick Guide Step 1. Downloading The Software Step 2. Choosing The Right Thinknx Server Step 3. Setting Up The Server Step 4. Creating The First Project Step 5. Deploying The Project Step 6. Authenticating Clients Step 1. Downloading The Software [Thinknx Configurator] Figure 1.1: Thinknx Configurator ThinKnx UP Configurator software is the indispensable tool for the creation and development of a supervision project. It is a complete solution to designing attractive graphi… text/html 2026-09-24T15:47:37+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=remote_maintenance&rev=1790257657&do=diff Remote Maintenance The Remote Maintenance feature allows System Integrators to establish a tunnel to a Thinknx server over the Internet, enabling configuration and maintenance without being physically present on site. Through the remote connection, it is possible to: text/html 2025-04-08T13:24:12+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=repository&rev=1744111452&do=diff Demo Project Here, we will provide a series of projects with their own download buttons. These are configuration examples for Thinknx servers or specific functionalities such as the Via Vai system. Thinknx Up Demo Project The demo project is available on each of our individual applications. It features 3D maps, quick links, and some of the most commonly used functions in Thinknx servers, including: Heating, Security, IP Cameras, Doorcom, Energy Management, Weather, and Remote Controls. text/html 2021-10-28T14:24:30+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=software_shortcuts&rev=1635423870&do=diff Software Shortcuts Thinknx UP Configurator version 1.3.0.20 or above supports many shortcut keys that the integrator can use in order to navigate and execute commands in a much faster and easier way. Some of the shortcuts below are also supported in version 1.3.0.18: text/html 2025-10-28T13:23:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=start&rev=1761654227&do=diff We have made some changes on the new servers starting from version 1.1.10.25 (September 17, 2025). See the quick guide, section 3.3.a. Introduction Welcome to Thinknx Wiki, your guide to a smooth Thinknx experience. But first, what is Thinknx? Thinknx is a universal, multi-purpose supervisor text/html 2026-09-24T10:52:04+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=sys_arch&rev=1790239924&do=diff System Architecture new! new! new! Introduction: System Components ThinKnx is a supervision system for home and building automation based on client-server architecture. The consists of one ThinKnx device (Compact, Micro, Rack or Touch) that represents the logical unit of the system and controls all the equipment connected to it. The text/html 2024-05-27T14:10:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=system_objs_beta&rev=1716811843&do=diff System Objects new! new! new! new! System This object is the main node of the system tree and includes all the main features and data that describe the project. All other objects, which represents the configurable services provided by the server, can be added to the project by right clicking on this node.$\uparrow$$\downarrow$$\rightarrow$$\leftarrow$ text/html 2026-09-16T11:14:09+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=system_objs&rev=1789550049&do=diff System Objects new!ETS ProjectImport KNX Project new! new! new!new! new! new! System This object is the main node of the system tree and includes all the main features and data that describe the project. All other objects, which represents the configurable services provided by the server, can be added to the project by right clicking on this node.$\uparrow$$\downarrow$$\rightarrow$$\leftarrow$ text/html 2024-10-10T11:16:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=thinknx_cloud&rev=1728551770&do=diff ThinKnx Cloud Thinknx Cloud is used for several services in the Thinknx system: [Thinknx Cloud Services ] Figure 1: Thinknx Cloud Services Modifying and updating the project remotely on server and clients. Using the Thinknx Configurator, the integrator or installer can deploy the modified project to the Cloud. The server will automatically be alerted and will reboot once the new version is downloaded, and all the clients will get a notification that a newer version of the project is availabl… text/html 2026-10-08T14:45:26+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=thinknx_server_web_interface&rev=1791463526&do=diff Thinknx Server Web Interface The Thinknx server web interface allows you to manage, configure, and monitor the device through a standard web browser, without using additional software. Through this interface, it is possible to view server information, modify network settings, manage licenses, configure cloud services, perform updates, and use diagnostic tools. text/html 2026-10-12T12:10:42+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=tkx_rel_note_cfg&rev=1791799842&do=diff ThinKnx UP Configurator 2026/10/09 - rel. 1.4.8 Enhancements General Proline Portrait Arrange Tool: introduced a new dedicated window for automatic alignment and layout arrangement of UI elements in portrait mode for Proline servers.Project Tree Drag & Drop: added the ability to reorganize elements and nodes in the project tree view via drag and drop. text/html 2026-07-30T16:21:53+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=tkx_rel_note_client&rev=1785421313&do=diff ThinKnx UP client 2026/07/30 - rel. 1.2.44 (All platforms) Enhancements More flexible access with ViaVai — grant users access to specific areas, even beyond their assigned roleQR code entry — associate a QR code with an entry for quick, secure access to specific areas text/html 2026-10-12T12:09:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=tkx_rel_note_server&rev=1791799750&do=diff Thinknx UP Server 2026/10/09 - rel. 1.1.10.33 Enhancements Voice Control & Alexa: extended thermostat control with configurable raw KNX HVAC mode values, setpoint range clamping, and enhanced shutter/dimmer relative adjustment commands.System Updater: introduced the new Envision updater pipeline and improved overall firmware update reliability. text/html 2019-03-20T17:04:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=tkx_rel_note&rev=1553097884&do=diff ThinKnx UP Configurator 03/04/2019 - rel. 1.3.0.8 Enhancements Added integration with DuoTecno systemAdded support for actions on Lutron buttons eventsAdded support for Virtual inputs on Paradox Evo panel Fixes Fixed problems when creating chrono switches for dimmers text/html 2026-05-19T12:01:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=user_manual_trend&rev=1779184909&do=diff End User Manual Trend Line Click here to download the manual as PDF. Table of Content [ Thinknx Products] Figure 1: Thinknx Products Introduction This user manual is designed for end users who have installed Trend Line products as a server in their home. It is a guide on how to use the Thinknx Trend application available on Android and iOS. Each project is different, but this guide provides an overview of the most common features, allowing the user to easily navigate through the inte… text/html 2025-09-11T15:54:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=user_manual&rev=1757598883&do=diff End User Manual Click here to download the manual as PDF. Table of Content 1. Introduction2. General Layout2.1. Project Interface2.2. Settings Interface 2.2.1. Add a Project 2.2.2. Authenticate Clients 2.2.3. Delete a Project 2.2.4. General Settings 2.2.5. Advanced User Settings3. General Functions3.1. Lighting3.1.1. Switch3.1.2. Dimmer3.1.3. RGB3.2. Motorization 3.2.1. Shutter 3.2.2. Blind3.3. Climate3.3.1. HVAC3.3.2. Thermo Comfort3.4. Scene3.5. Scheduler Manager3.6. Intercom3.7. Security3.8… text/html 2025-05-26T14:16:08+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=voice_control&rev=1748261768&do=diff Voice Control Gateway [Voice Control with Thinknx] Figure 1: Voice Control with Thinknx This object allows you to control the house by sending voice commands to your voice enabled device. Integration can be done via: - New! Google Assistant - Coming soon Inside the Configurator text/html 2022-05-13T19:00:42+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.thinknx.com/wiki/doku.php?id=zwave_db&rev=1652461242&do=diff Compatible Z-Wave Devices ManufacturerIdTypeIdProductIdManufacturerNameNameModel3773319ConnectHomeMultifunctional double channel switchCH-1023773317ConnectHomeMultifunctional single channel switchCH-1013776520ConnectHomeMotor control moduleCH-1031032