Differences

This shows you the differences between two versions of the page.

--- generic_commands [2019/08/29 09:44] – [Security] ingrid
+++ generic_commands [2019/08/29 09:57] – [Generic Commands] ingrid
@@ Line 1: / Line 1: @@
 ====== Generic Commands ======
-<WRAP centeralign><wrap important> This page is under construction </wrap></WRAP>
-\\  When an object is added to the System, and if this object allows it, a list of commands related to this object will be accessible to be used on a generic button, inside the logic module, in a universal gateway, etc.
+\\  When an object is added to the System, a list of all the commands related to this object will be accessible, if applicable. These commands can be used on a generic button, inside the logic module, with the universal gateway, etc.
 The commands are grouped into 5 categories:
@@ Line 21: / Line 21: @@
     * **KNX Group** Group address to sen the value.
     * **KNX value** Can be either 1 or 0.
- A generic button can be configured to send a 1 bit KNX telegram to open a door.
 ++++
 ++++Send KNX Byte Telegram|  This command is used to send a 1 byte value to the KNX bus.
@@ Line 35: / Line 35: @@
 ++++Send KNX Float 4 Byte Telegram|  This command is used to send a 4 byte float value to the KNX bus.
   * **KNX Group** Group address to send the value.
-  * **KNX value** <wrap hi>4-Octet Float Value IEEE 754</wrap>
+  * **KNX value**
 ++++
 ++++Send KNX String Telegram|  This command is used to send a string of 14 bytes to the KNX bus.
@@ Line 48: / Line 48: @@
 ++++Read KNX group address|  This command is used to read a value from the KNX bus.
   * **KNX Group** Group address to read the value from.
-If a device installed on the KNX bus does not update its status automatically, this command can be used to force the reading on the group address. It can be used on a generic button to read the values when clicking the button, or inside a logic module whenever the device is turned ON.
 ++++
 ++++Make a pause for a fixed interval|  This command pauses the system for a specified time interval configurable in milliseconds.
   * **Interval** Time interval in milliseconds.
-When saving a scene, sometimes a pause between two commands is necessary, for example, when saving the TV channel number. Another application is creating a pause before turning off the final light in a Goodbye scene, making sure that the client has left the house.
+When saving a scene, sometimes a pause between two commands is necessary, for example, when saving the TV channel number. Another use of the Pause application would be before turning off the final light in a Goodbye scene, making sure that the client has left the house.
 ++++
 ++++Change UI Function and Page: GENERAL| This command allows to redirect **all clients** to a specific function and page.
@@ Line 71: / Line 70: @@
 ++++
 ++++Execute MS Windows Command: GENERAL| This command allows to launch an .exe file directly from the ThinKnx application on all Players for Windows.
-  * **<wrap hi>Command</wrap>**
+  * **Command**
-  * **<wrap hi>Parameter</wrap>**
+  * **Parameter**
 ++++
 ++++Execute MS Windows Command: SPECIFIC CLIENT| This command allows to launch an .exe file directly from the ThinKnx application on all Players for Windows.
-  * **<wrap hi>Command</wrap>**
+  * **Command**
-  * **<wrap hi>Parameter</wrap>**
+  * **Parameter**
 ++++
 ++++Recall iOS app with url| This property allows to launch a specific application on iOS devices directly from the ThinKnx app by typing the related URL.\\