pbx_doorcom

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
Next revisionBoth sides next revision
pbx_doorcom [2019/07/22 13:03] – [Integration example: Mobotix T25 doorstation] ingridpbx_doorcom [2019/07/22 16:06] – [Integration example: Mobotix T25 doorstation] ingrid
Line 262: Line 262:
 The final step to be able to make a call from the intercom would be to configure the button on the Mobotix. The final step to be able to make a call from the intercom would be to configure the button on the Mobotix.
 To do that, close the “Admin menu” and instead access the “Setup Menu” from the live interface. To do that, close the “Admin menu” and instead access the “Setup Menu” from the live interface.
- 
-{{ :mx_setup_menu.png?direct&800 |}} 
  
 Once inside, look for “Event Control” and click on “Action Group Overview”. Once inside, look for “Event Control” and click on “Action Group Overview”.
 +
 +{{ :mx_setup_menu.png?direct&800 |}}
  
 Click on “Add new group” to create a new entry and name it “Button” or “Bell Button”. Click on “Add new group” to create a new entry and name it “Button” or “Bell Button”.
Line 280: Line 280:
  
 <WRAP center round important 60%> Once the configuration is completed, do not forget to store the settings on the Mobotix device. This can be done by going to the Admin Menu and scrolling down to the bottom where you will see the option "Store". A reboot will need to take place after storing. </WRAP> <WRAP center round important 60%> Once the configuration is completed, do not forget to store the settings on the Mobotix device. This can be done by going to the Admin Menu and scrolling down to the bottom where you will see the option "Store". A reboot will need to take place after storing. </WRAP>
 +
 +{{ :mx_admin_main.png?direct&800 |}}
  
  
  • pbx_doorcom.txt
  • Last modified: 2023/09/04 12:45
  • by ingrid