Differences

This shows you the differences between two versions of the page.

--- access_control [2020/07/28 19:57] – ingrid
+++ access_control [2021/06/17 11:06] – ingrid
@@ Line 96: / Line 96: @@
   * **KNX group n.persons** KNX group (2byte unsigned integer - DPT7) to signal the number of persons in the area.
-=== Timing ===
-This parameter allows to configure timing restrictions for roles. Clicking on the small button to the right will open the Time Manager. Each added element has the following parameter:
-  * **Name** label of timing
-  * **Time slots** time slots applied for the timing schedule created. clicking on the small button to the right will access the Time Slots Manager. For each slot, the below parameters are available:
-    * **Name**
-    * **From** Start of time slot
-    * **To** End of time slot
-    * **Days of week** Days of the week selection to apply the time slot
 === Roles ===
@@ Line 118: / Line 110: @@
   -   Configure a time range for this code's validity.
   - Save the code. A new entry will show in the table above with the added information. The admin will be able to edit this entry or delete it altogether.
+To allow direct access to the Access Control page, the Manager can use the link below, making sure to fill the proper IP address and password for the server:
+http://localhost:5051/login.html?login=login&direct_login&username=service&password=password&redirect=access_control_s.html
+{{ :access_control_webpage.png?direct&600 |}}
+<WRAP center 60%> <WRAP centeralign> Figure 4: Access Control Webpage </WRAP>  </WRAP>
 ===== Application 1: Virtual Keypad =====