Differences

This shows you the differences between two versions of the page.

--- access_control [2020/07/28 19:57] – ingrid
+++ access_control [2023/06/06 10:25] – [Application 1: Virtual Keypad] ingrid
@@ Line 96: / Line 96: @@
   * **KNX group n.persons** KNX group (2byte unsigned integer - DPT7) to signal the number of persons in the area.
-=== Timing ===
-This parameter allows to configure timing restrictions for roles. Clicking on the small button to the right will open the Time Manager. Each added element has the following parameter:
-  * **Name** label of timing
-  * **Time slots** time slots applied for the timing schedule created. clicking on the small button to the right will access the Time Slots Manager. For each slot, the below parameters are available:
-    * **Name**
-    * **From** Start of time slot
-    * **To** End of time slot
-    * **Days of week** Days of the week selection to apply the time slot
 === Roles ===
@@ Line 118: / Line 110: @@
   -   Configure a time range for this code's validity.
   - Save the code. A new entry will show in the table above with the added information. The admin will be able to edit this entry or delete it altogether.
+To allow direct access to the Access Control page, the Manager can use the link below, making sure to fill the proper IP address and password for the server:
+http://localhost:5051/login.html?login=login&direct_login&username=service&password=password&redirect=access_control_s.html
+{{ :access_control_webpage.png?direct&600 |}}
+<WRAP center 60%> <WRAP centeralign> Figure 4: Access Control Webpage </WRAP>  </WRAP>
 ===== Application 1: Virtual Keypad =====
-This application does not require any additional hardware to be installed on site. With the Access Control module configured inside the Configurator, the integrator will be able to provide the user with an extra level of security for certain scenarios or logic functions. To get a sample of the project that contains the virtual keypad, please contact us on **info@thinknx.com**.
+This application does not require any additional hardware to be installed on site. With the Access Control module configured inside the Configurator, the integrator will be able to provide the user with an extra level of security for certain scenarios or logic functions.
+Click on the button below to get a sample of the project that contains the virtual keyad:
+<WRAP button centeralign> \\ {{:KNX_Virtual_Alarm_Keypad.zip|Download Project}}</WRAP>
 <WRAP group>