Differences

This shows you the differences between two versions of the page.

--- generic_commands [2019/04/02 08:53] – [Reports and Gateways] ingrid
+++ generic_commands [2019/04/02 08:56] – [Reports and Gateways] ingrid
@@ Line 195: / Line 195: @@
 The available commands when selecting the **Serial Gateway** category under **Reports and Gateways** are the following:
-++++Send string with no termination|
+++++Send string with no termination| This command is used to send a text without termination.
   * **String to send** input the string that will be sent to the serial gateway.
 ++++
-++++Send string with CR termination|
+++++Send string with CR termination| This command is used when sending a text with CR termination, marking the end of the line.
   * **String to send** input the string that will be sent to the serial gateway.
 ++++
-++++Send hexadecimal string with no termination|
+++++Send hexadecimal string with no termination| This command is used to send an hexadecimal string without termination.
   * **String to send** input the string that will be sent to the serial gateway.
 ++++
-++++Send hexadecimal string with CR termination|
+++++Send hexadecimal string with CR termination| This command is used when sending an hexadecimal string with CR termination, marking the end of the line.
   * **String to send** input the string that will be sent to the serial gateway.
 ++++