Differences

This shows you the differences between two versions of the page.

--- lm_timer_stairwell [2017/09/29 09:48] – created wikiadmin
+++ lm_timer_stairwell [2017/09/29 10:03] – wikiadmin
@@ Line 6: / Line 6: @@
 The timer is set to the time defined in the **Time for ON** property of the node and if the property **Retriggerable** is enabled, the timer restarts whenever the **Input** connector receives 1.\\
 If the property **Manual OFF** is enabled, when the **Input** connector value goes to 0 the node sends 0 to the **Output** connector and automatically stops the timer; otherwise the expiration of the timer is the only condition to send 0 to the **Output** connector.\\
+The **Warning** connector value goes to 1 before the timer expires until the **Output** connector is 1. The time for warning is specified through the **Warning before OFF** property.
+{{ :diagram_random2.png | Behaviour of Stairwell Lighting Switch }}
-{{ :diagram_random2.png | Behaviour of Random Generator }}
+<WRAP center 60%> <WRAP centeralign> Behaviour of Stairwell Lighting Switch </WRAP>  </WRAP>
-<WRAP center 60%> <WRAP centeralign> Behaviour of Random Pulse Generator </WRAP>  </WRAP>