Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revisionLast revisionBoth sides next revision | ||
pbx_doorcom [2019/07/22 16:11] – [Integration example: Mobotix T25 doorstation] ingrid | pbx_doorcom [2023/09/04 12:34] – [Adding intercom devices] ingrid | ||
---|---|---|---|
Line 6: | Line 6: | ||
* **PBX port** This property allows to specify the PBX port if different from the default one (5060). | * **PBX port** This property allows to specify the PBX port if different from the default one (5060). | ||
- | * **Accounts PBX** This property represents the list of extensions (clients) to be registered in the PBX. | + | * **Accounts PBX** This property represents the list of **extensions (clients)** to be registered in the PBX. |
- | * **Ring groups** This property represents the list of ring groups to be registered in the PBX. Ring groups allow to call more than one extension using a single number. The outdoor station can forward the call to several clients using a single number. | + | * **Ring groups** This property represents the list of **ring groups** to be registered in the PBX. Ring groups allow to call more than one extension using a single number. The outdoor station can forward the call to several clients using a single number. |
- | * **Intercom devices** This property represents the list of intercom devices to be registered in the PBX. | + | * **Intercom devices** This property represents the list of **intercom devices** to be registered in the PBX. |
+ | The diagram below gives a general overview on the configuration when using a Thinknx server as a VoIP PBX. | ||
+ | |||
+ | {{ : | ||
+ | <WRAP center 60%> <WRAP centeralign> | ||
+ | |||
+ | <WRAP Important center round 80%> When using an external VoIP PBX, there is no need to add the object "VoIP PBX" in System. All the extensions are configured on the external PBX. It is only essential to create one user per extension in " | ||
==== Adding PBX accounts ==== | ==== Adding PBX accounts ==== | ||
Click on the button displayed on the right to open the PBX users editor window, then click on ”Add” and adjust the properties in the grid: | Click on the button displayed on the right to open the PBX users editor window, then click on ”Add” and adjust the properties in the grid: | ||
- | * **Extension** This property allows to specify the extension number used by the client to join the PBX. | + | * **Extension** This property allows to specify the extension number used by the client to join the PBX. Extension number starts from 100. |
* **Password** This property allows to specify the password associated to the extension number. | * **Password** This property allows to specify the password associated to the extension number. | ||
Line 24: | Line 30: | ||
* **Accounts PBX** PBX accounts associated to this ring group | * **Accounts PBX** PBX accounts associated to this ring group | ||
+ | co | ||
==== Adding intercom devices ==== | ==== Adding intercom devices ==== | ||
Click on the button displayed on the right to open the intercom devices editor, click on ”Add” and adjust the properties in the grid: | Click on the button displayed on the right to open the intercom devices editor, click on ”Add” and adjust the properties in the grid: | ||
- | * **Device type** | + | * **Device type** |
- | * //2N Elios IP// | + | * //2N// |
- | * //Mobotix M24// | + | * //Doorbird// |
- | * //TCS gateway// | + | * //Fermax// |
- | * //TCS Native// | + | * //Mobotix// |
- | * //Generic IP doorstation// | + | * //TCS// |
+ | * and much more! | ||
* **Username web** This property corresponds to on of the login parameters of intercom management web page. | * **Username web** This property corresponds to on of the login parameters of intercom management web page. | ||
* **Password web** This property corresponds to on of the login parameters of intercom management web page. | * **Password web** This property corresponds to on of the login parameters of intercom management web page. | ||
Line 62: | Line 70: | ||
* Add several users into the " | * Add several users into the " | ||
* Add an intercom into the " | * Add an intercom into the " | ||
- | * Add a ring group and select the users you want to call with that ring group. A number will be shown. That number is the extension associated to that ring group (9001). Calling that number will canuse | + | * Add a ring group and select the users you want to call with that ring group. A number will be shown. That number is the extension associated to that ring group (9001). Calling that number will cause all the associated users to ring. |
=== 2N Helios IP setup === | === 2N Helios IP setup === | ||
Line 113: | Line 121: | ||
To be able to open the Lock connected to the 2N device you have two options: to send **DTMF** tones during conversation or to send html **GET** messages to the device. | To be able to open the Lock connected to the 2N device you have two options: to send **DTMF** tones during conversation or to send html **GET** messages to the device. | ||
- | If you want to use DTMF tones, it will be enough to create a Generic Buttom into the UI and select as action the generation of DTMF tone as in the following picture. DTMF code must be the same inserted into the 2N configuration page followed by **#** (in the example 1234#). | + | If you want to use DTMF tones, it will be enough to create a Generic Buttom into the UI and select as action the generation of DTMF tone as in the following picture. DTMF code must be the same inserted into the 2N configuration page followed by ***** (in the example 1234*). |
If you prefer to use html GET solution, you need to use the Thinknx Ethernet Gateway plugin and configure a Generic Button to perform an action with the following parameters: | If you prefer to use html GET solution, you need to use the Thinknx Ethernet Gateway plugin and configure a Generic Button to perform an action with the following parameters: | ||
Line 142: | Line 150: | ||
* Add several users into the " | * Add several users into the " | ||
* Add an intercom into the " | * Add an intercom into the " | ||
- | * Add a ring group and select the users you want to call with that ring group. A number will be shown. That number is the extension associated to that ring group (9001). Calling that number will canuse | + | * Add a ring group and select the users you want to call with that ring group. A number will be shown. That number is the extension associated to that ring group (9001). Calling that number will cause all the associated users to ring. |
=== Doorbird setup === | === Doorbird setup === | ||
Line 161: | Line 169: | ||
- Set the Autocall doorbell as sip: | - Set the Autocall doorbell as sip: | ||
- Set DTMF to enabled to be able to open the lock using DTMF codes | - Set DTMF to enabled to be able to open the lock using DTMF codes | ||
+ | - Finally, make sure that the Thinknx account is allowed to make calls by selecting all the days of the week in the schedule as seen in the picture below. | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | The same procedure can be done using the DoorBird app into the dedicated SIP configuration section, or by accessing their portal on https:// | ||
- | The same procedure can be done using the DoorBird app into the dedicated SIP configuration section. | ||
To be able to see the images coming from the device you need to add a Camera inside Thinknx UI and configure to grab images using the following parameters: | To be able to see the images coming from the device you need to add a Camera inside Thinknx UI and configure to grab images using the following parameters: | ||
Line 171: | Line 183: | ||
To be able to open the Lock connected to the Doorbird device you have two options: to send **DTMF** tones during conversation or to send html **GET** messages to the device. | To be able to open the Lock connected to the Doorbird device you have two options: to send **DTMF** tones during conversation or to send html **GET** messages to the device. | ||
- | If you wnat to use DTMF tones, it will be enough to create a Generic Buttom into the UI and select as action the generation of DTMF tone as in the following picture. DTMF code must be the same inserted into the Doorbird configuration page followed by **#** (in the example 1234#). | + | If you wnat to use DTMF tones, it will be enough to create a Generic Buttom into the UI and select as action the generation of DTMF tone as in the following picture. DTMF code must be the same inserted into the Doorbird configuration page followed by ***** (in the example 1234*). |
{{ : | {{ : | ||
Line 238: | Line 250: | ||
{{ : | {{ : | ||
- | <WRAP center important round 80%> If you are unable to view the parameters above, make sure that you scroll down to the "Setup Mode" and select " | + | <WRAP center important round 80%> If you are unable to view the parameters above, make sure that you scroll down to the "Setup Mode" and select " |
{{ : | {{ : | ||
Line 285: | Line 297: | ||
{{ : | {{ : | ||
+ | ==== Integration example: Fermax Milo Panel ==== | ||
+ | |||
+ | The information below is extracted from a more detailed guide available on Fermax: | ||
+ | |||
+ | https:// | ||
+ | |||
+ | === Voip PBX setup === | ||
+ | |||
+ | Add the Voip PBX object and configure as follow: | ||
+ | * Add several users into the " | ||
+ | * Add an intercom into the " | ||
+ | * Add a ring group and select the users you want to call at the same time with that ring group. A number will be shown. That number is the extension associated to that ring group (9001). Calling that number will cause all the associated users to ring. | ||
+ | |||
+ | === Configuring Milo Panel === | ||
+ | |||
+ | On your Milo Panel webpage, access Web server > General > Configure MEET P2P call (Block = 1; Apart. = 101) | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | Open SIP > Register the ThinKNX Micro server as your panel' | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | Access SIP Call and configure your Apartment 101 to call group 9001 on the SIP Thinknx server. | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | === Camera Configuration === | ||
+ | In a new page on your interface, add the object " | ||
+ | {{ : | ||
+ | === Door Opening === | ||
+ | In the same page created earlier, add the object " | ||
+ | {{ : | ||