Differences

This shows you the differences between two versions of the page.

--- tkx_rel_note_cfg [2019/09/08 10:05] – wikiadmin
+++ tkx_rel_note_cfg [2025/05/23 19:32] (current) – wikiadmin
@@ Line 1: / Line 1: @@
 ====== ThinKnx UP Configurator ======
-===== 08/09/2019 - rel. 1.3.0.10 =====
+===== 2025/05/22 - rel. 1.4.0.1 =====
+=== Enhancements ===
+==System Objects==
+  * Added new object Log Manager to keep track of all important events on the plant
+  * Added BACNet object for interacting with BACNet devices. Thinknx can operate as BACNet supervisor or BACNet device.
+  * Added easier access to Logic Module window and the possibility to open multiple schemes together and copy/paste between them
+  * Added a new property on Logic Module nodes to evaluate blocks only if the input are all populated with valid values
+  * Added new node Time Converter on Logic Module to manipulate date/time values from knx and split into separate numbers
+  * Added new node Multi-threshold on Logic Module to trigger different commands basing on different ranges of an input value
+  * Added new node Thermostat Setpoint on Logic Module to deal with winter and summer setpoint and automatic changeover
+  * Added heartbeat Tester to check if a KNX device is alive basing on the recurring reception of specific KNX group addres
+  * Added possibility to add custom Header fields in HTTP requests made with Ethernet gateway
+  * Added support for license plate recognition in ViaVai
+  * Added command to open custom pop-up only for specific users
+  * Added command to select color, temperature and brigthness for RGB objects
+  * Added command to open log console
+== Graphic Objects==
+  * Added the Separator object to create subgroups of items when the device is rotated in portrait mode
+  * Added the Sun Tracker object intended to show information related to sun position and sunrise/sunset timing
+  * Added possibility to limit the available modes on the HVAC controller graphic object
+  * Added possibility to limit the available modes on the Comfort Thermostat graphic object (when in extended mode)
+  * Added possibility to enable/disable Comfort Thermostat graphic object also with 1 bit object instead of 1 byte (modality command)
+  * Added possibility to handle inverted Fan mode feedback in Comfort Thermostat graphic object to be compatible with some manufacturer
+  * Added possibility to change the color of the interface header (menu) basing on a specific event (command)
+  * Added support for charts inside custom pop-ups
+  * Added many options on graphics widgets for Trendline devices
+  * Added possibility to arrange and copy/paste pages in Trendline device
+  * Added possibility to duplicate Trendline devices
+==Others==
+  * Added possibility to align all the devices locally with the status of the project (Local Provisioning)
+  * Added positioning button to center objects horizontally/vertically on the page
+  * Possibility to search for KNX group addresses also in Trendline devices and in the Logic Schemes
+  * Possibility to manipulate KNX groups with masks to massively edit them
+  * Added property for users to enable/disable PIN code editing
+  * Added property for users to enable/disable ViaVai management console
+  * Added property for users to enable/disable the log console
+  * Added property for users to enable/disable recording of client specific action in scenes
+  * Added preview of the paramaters used in command directly into the command property
+=== Fixes ===
+  * Improved controls on projects to avoid that corrupted projects prevent opening of configurator
+  * Fixed a bug that was preventing the sending of users data email
+  * Fixed a bug on PBX object when creating the object for the first time
+  * Fixed bugs when copying objects from Proline to Trendline
+  * Fixed bugs on http commands editor windows
+  * Fixed bugs on Velux editor. Now connection with gateway is only manual
+  * Fixed a bug on the ordering in Portrait view
+  * Fixed bugs on command parameter visibility in Logic Module
+  * Fixed some datatype error for Modbus gateway
+  * Fixed minor errors on some Logic Nodes
+Some of the features requires minimal Server version 1.1.10.25.
+===== 2024/01/09 - rel. 1.4.0.0 =====
+=== Enhancements ===
+  * Added possibility to configure the new line of devices Trendline
+  * Added support for virtual IP keypad in ViaVai access control to interact with IP based devices(2N etc)
+  * Added command to restart KNX device
+  * Added command to wake up backlight of client devices
+  * Added command to send audio notification for specific users
+  * Added support for Lutron RA systems
+  * Added user selectable auto-off function in chronoswitch object
+  * Added KNX dimming possibility for Philips Hue
+=== Fixes ===
+  * Fixed several bugs on system object and graphical handling
+Some of the features requires minimal Server version 1.1.10.24.
+===== 2022/10/13 - rel. 1.3.0.24 =====
+=== Enhancements ===
+  * Added possibility to customize background of pages
+  * Added tool to translate project in multiple languages
+  * Added tool to search and replace KNX groups automatically
+  * Added option for enabling OTP and creation of clients
+  * Added multiple options on MQTT and Ethernet Gateway
+  * Added option for slider objects
+  * Added protection to password fields (can be cleared with right button)
+  * Added support for Alexa and Google Home
+  * Added support for Upnp Players using Sonos manager
+  * Added support for Wake On Lan commands
+  * Added support for FIAS protocol (Beta)
+=== Fixes ===
+  * Fixed errors copying objects on logic module
+  * Fixed threshold filter on logic module
+  * Fixed several bugs on project export
+Works with Server version 1.1.10.22 and later.
+===== 2022/05/05 - rel. 1.3.0.23 =====
+=== Enhancements ===
+  * Added management of object visibility that allow to hide/show objects basing on command
+  * Added additional properties to slider widget
+  * Added Settings pane to customize program behavior
+  * Added Duplicate shortcut to right button menu for all the objects
+  * Added option to disable TP KNX bus when not used to route all traffic to network
+  * Added OpenWeatherMap object
+  * Added Virtual Input and Output on Ethernet Gateway for interacting with IoT
+  * Added support for MQTT using server as Subscriber and as Broker (BETA)
+=== Fixes ===
+  * Fixed errors when moving multiple objects with scaled environment
+  * Fixed support for not unary coefficient in slider
+  * Fixed behavior of image scaling for object (Native/Fit)
+  * Fixed error on Chart editor
+  * Fixed some graphic glitches on roller icons
+  * Fixed background behavior of Extended command object
+  * Fixed some errors when using usernames with UTF characters
+===== 2022/04/01 - rel. 1.3.0.22 =====
+=== Enhancements ===
+  * Added fully customizable pop-ups
+  * Completely redesigned project handling windows
+  * Added possibility to create backup points of the projects
+  * Added possibility to easily clone projects
+  * Added slider object for analog values
+  * Added possibility to show numeric values on circle and bars
+  * Added possibility to control Velux using network gateway
+  * Added new feature to the browser object
+  * Added new commands to navigate between pages and pop-ups
+  * Added new commands to mute SIP clients ringtone
+  * Added new commands to change pages in browser (like favorites buttons)
+  * Added a graphic editor to set main server properties
+  * Added VNC viewer to connect to Envision screens directly from configurator
+  * Improved RGB object and added multiple new data types
+  * Improved ETS window and KNX group handling
+  * Improved groups of interface objects handling
+  * Improved logic script editing
+  * Improved loading speed
+=== Fixes ===
+  * Fixed errors on restrictions per Users/Groups
+  * Fixed error copy/paste of object groups
+  * Fixed problems on copying pages containg groups
+  * Fixed error hue object with on/off lamps
+  * Improved undo/redo of operations with pages
+===== 2021/12/13 - rel. 1.3.0.21 =====
+=== Enhancements ===
+  * Improved groups of interface objects handling
+  * Improved logic script editing
+  * Improved loading speed
+=== Fixes ===
+  * Fixed possible errors on jump page command
+  * Fixed error on portrait mode when moving groups
+  * Fixed error on editing roles/pbx users
+  * Fixed problems on copying pages containg groups
+===== 2021/11/28 - rel. 1.3.0.20 =====
+=== Enhancements ===
+  * Added possibility to create custom script in the logic engine
+  * Added support for new Bticino gateways and absolute positioning of rollers
+=== Fixes ===
+  * Fixed problem on roller that was preventing KNX group to be loaded back properly
+  * Remove a shortcut that was conflicting with text editing
+  * Fixed flickering on ETS window
+  * Restored possibility to use ETS window while editing commands
+  * Other minor fixed
+===== 2021/11/21 - rel. 1.3.0.19 =====
+=== Enhancements ===
+  * Implemented in Working area Cross-Window selection when selecting items from right to left. Standard Box-Selection is still usable just when selecting items from left to right.
+  * Added property Biometric protection in interface objects, supports face recognition or finger print.
+  * Mirror property in interface objects.
+  * Added possibility to group together interface objects with variables
+  * Added possibility to view animated images (GIF)
+  * Added many options in Roller Shutter object to have better pop-ups customization
+  * Added possibility to connect with multiple KNXnet/IP interfaces at same time
+  * Added grid view for collection items editing
+  * Added Memory Node in the logic module
+  * Improved user experience using ETS Window
+=== Fixes ===
+  * Improved Undo/Redo functionality
+  * Highlight of matched item using search bar in project explorer
+  * Improved support of High DPI screens
+  * Added new shortcuts (visit wiki for full list)
+  * Improved all the graphical objects
+===== 2021/04/28 - rel. 1.3.0.18 =====
+=== Enhancements ===
+  * Search Bar added in Interface and System Tree.
+  * Page automatically added when Interface object is added from Function.
+  * Improved memory management using Web Browser object in order to avoid memory leaks.
+  * Improved search of a KNX group or command extended for all objects.
+  * Implemented snap grid for interface objects.
+=== Fixes ===
+  * Clipboard fixed problem using resources, import and export functionalities and display order of items.
+  * Fixed various problems related to Clone functionality in collection items.
+  * Fixed various issues about custom licenses storage and country-base licenses.
+  * Fixed unhandled exception using shortcut CTRL+A.
+  * Fixed thermostat limits with relative temperature.
+===== 2021/03/31 - rel. 1.3.0.16 =====
+=== Enhancements ===
+  * Added Clipboard feature to store or track recently copied UI objects or Pages. This permits to copy from one project to another and export to another PC.
+  * Added missing translations and updated the description for various objects.
+  * Added a mechanism to share and load projects. For each user, it is now possible to display a data summary that  can be sent directly via email or exported as PDF document. This summary also contains a QR code that permits to load projects onto customers smartphones.
+  * Enforced security policies for Name and Password in Users and Groups.
+  * Added the possibility to import projects created with Theben TheServa Configurator and to update Theben server with the latest Thinknx UP firmware.
+  * Added the possibility to convert all Thinknx Legacy servers (Classic) to Thinknx UP.
+  * Added the "Notifications" area that allows user to:
+    * Update the configurator to the latest version.
+    * Check that Thinknx UP Configurator has been correctly added to the windows Firewall exclusions.
+    * See latest new about the product.
+  * Several enhancements have been added to the Logic Module.
+    * Improved name and position of pasted elements after copying them. Connection arrows in copied nodes are preserved.
+    * Added a customizable snap grid.
+    * Added Arrange butons.
+    * Improved the logic connection when dragging the arrow from one input connector to an output.
+  * Updated content of Licenses area. Default licenses are automatically selected depending on the server model and serial number.
+  * Added Security Passwords for storing passwords that can be used to protect the Camera object.
+  * Removed the limit on the number of KNX variables.
+=== Fixes ===
+  * Changed setpoint type from "Base + Relative (DPT5) to "Base + Relative (DPT6)".
+  * Solved various issues in Colors Dialog. Custom colors are now saved.
+  * Fixed various issues in Copy/Paste function in Logic Module. Values of nodes properties are now preserved after loading previously saved project.
+  * Fixed the Clone button. Modifying the cloned item will no longer affect the original element.
+  * Fixed the saving of the Text background size after modifying another parameter.
+  * Fixed calculation of Date and Time objects in Logic Module and Math Expressions.
+  * Fixed some bugs in Logic Module such as saving of IR commands.
+  * Fixed saving of parameters in Database object.
+  * Fixed HVAC feedback issues with same groups on multiple objects.
+  * Fixed search of certain KNX group addresses configured into the Thermocomfort object with relative setpoint and in many other cases.
+  * Fixed export for server functionality to include also logic schemes.
+  * Fixed issues when properties of multiple Analog Values change.
+  * Fixed issue in reverse functioning of Load Control after closing and opening the project again.
+  * Fixed recovery of projects after unexpected crash and other various crashes.
+===== 2020/08/27 - rel. 1.3.0.14 =====
+After a lot of work, a long awaited update with many fixes and improvements:
+=== Enhancements ===
+  * Added math expression to transform KNX float to 2 raw bytes
+  * Added math expression to shift right or left bits in bytes
+  * Added math expression to extract some bytes from a bigger number
+  * Added support for Modbus ASCII
+  * Added support for Modbus Slave gateway
+  * Added support for many new Modbus data types
+  * Added support for write Mobdus value from KNX
+  * Added support for cyclical writing on Modbus
+  * Added "clone" button to clone objects in list editors (scene action, modbus datapoint etc.)
+  * Added status feedbacks for home theaters
+  * Added customizable threshold (via KNX) for Load Module
+  * Added possibility to hide scheduler icon for specific users
+  * Added additional options for SIP clients to resolve problems in nested networks
+  * Improved speed on startup and when opening projects
+  * Added shortcuts to support Shift+Del/Shift+Ins for copy/paste
+  * Added support for full screen Web browser and Audiofy
+  * Added variable max and min on Range verifier in logic module
+=== Fixes ===
+  * Fixed portrait view to reorder objects in list
+  * Fixed support for 4bits, date and time values in math expression
+  * Fixed some bugs on Lutron QS object that was preventing to read config file
+  * Fixed a problem with second DNS on server manager
+  * Fixed a problem on Sonos Manager that was preventing identification by IP
+  * Fixed a several bugs in Logic Module elements
+  * Fixed some other minor bugs and translations
+=== Other Notes ===
+  * Works with Server version 1.1.10.16 and later.
+  * Installation may require computer restart
+  * On some Intel graphic cards it may be mandatory to update the drivers to the latest available
+===== 2020/03/20 - rel. 1.3.0.12 =====
+=== Enhancements ===
+  * Added support for Philio gateway
+  * Improved Thinknx Access Control System
+  * Added option on KNX variables to decide if read at startup is needed
+  * Added option on KNX variables to decide if write back stored value at startup
+=== Fixes ===
+  * Fixed server updater to support Rack server
+  * Fixed read group at startup for temperature setpoint command
+  * Fixed logic editor storage for some blocks (timers, statistics)
+  * Fixed some other minor bugs and translations
+=== Other Notes ===
+  * Works with Server version 1.1.10.15 and later.
+  * Installation may require computer restart
+  * On some Intel graphic cards it may be mandatory to update the drivers to the latest available
+===== 2020/01/14 - rel. 1.3.0.11 =====
+=== Enhancements ===
+  * Added support for KNXnet/IP on servers
+  * Improved Thinknx Access Control System
+  * Added Thinknx Sensors for interfacing Envision sensors with KNX
+  * Added intToDouble to Math Expressions to convert 32bits integer to double
+  * Added 8 bytes double as data type for Modbus
+  * Added feedbacks to Tutondo audio matrix
+  * Improved ETS import with different codepages
+=== Fixes ===
+  * Fixed firewall rules for configurator
+  * Fixed lost season group on Comfort Object
+  * Fixed an error on Generic Counter properties
+  * Fixed an error on optimizing images for Universal command
+  * Fixed some other minor bugs and translations
+=== Other Notes ===
+  * Works with Server version 1.1.10.13 and later.
+  * Installation may require computer restart
+  * On some Intel graphic cards it may be mandatory to update the drivers to the latest available
+===== 2019/08/09 - rel. 1.3.0.10 =====
 === Enhancements ===
@@ Line 34: / Line 374: @@
   * On some Intel graphic cards it may be mandatory to update the drivers to the latest available
-===== 30/04/2019 - rel. 1.3.0.9 =====
+===== 2019/04/30 - rel. 1.3.0.9 =====
 === Enhancements ===
@@ Line 59: / Line 399: @@
   * On some Intel graphic cards it may be mandatory to update the drivers to the latest available
-===== 03/04/2019 - rel. 1.3.0.8 =====
+===== 2019/04/03 - rel. 1.3.0.8 =====
 === Enhancements ===
@@ Line 81: / Line 421: @@
   * Z-Wave database updated to support much more devices
-===== 02/01/2019 - rel. 1.3.0.7 =====
+===== 2019/02/01 - rel. 1.3.0.7 =====
 === Fixes ===
@@ Line 91: / Line 431: @@
   * Fixed Lutron output selection
-===== 12/02/2018 - rel. 1.3.0.5 =====
+===== 2018/12/02 - rel. 1.3.0.5 =====
 === Enhancements ===