Differences

This shows you the differences between two versions of the page.

--- tkx_rel_note_server [2019/10/07 18:24] – wikiadmin
+++ tkx_rel_note_server [2020/08/27 01:21] – wikiadmin
@@ Line 1: / Line 1: @@
 ====== Thinknx UP Server =======
+===== 2020/08/26 - rel. 1.1.10.16 =====
+=== Enhancements ===
+  * Added support for date and time KNX objects on math expression, logic and other places
+  * KnxIp: Added mechanism to improve reconnection when disconnected
+  * Modbus: Added support for many more data types with BigEndian and LittleEndian
+  * Modbus: Added support for read and write from KNX with eventually 2 different groups
+  * Modbus: Added support for continous write for slaves that require frequent updates
+  * Modbus Slave: Added possibility to use server as Modbus slave
+  * Modbus: Added support for ASCII format
+  * Added floatto2bytes, shifbitright, shitbitleft, getbytes functions on MathCalculator
+  * Added status feedbacks from DENON
+  * Added possibility to change thresholds from KNX for Load Module
+  * Added support for basic and digest authentication for API
+  * Added support for the new products (Envision20 and Micro20)
+=== Fixes ===
+  * Modbus: Improved reconnection when using modbus over TCP
+  * NetworkComm: now on close all the clients are killed properly
+  * Sonos Manager: fixed a bug for PA coordinator not in the list of devices
+  * Sonos Manager: fixed a problem for identification by IP instead of MAC
+  * Thermostats: fixed some errors when using relative setpoint
+  * Improved ViaVai access control
+  * Paradox: fixed some communication errors
+  * Bentel Absoluta: improved communication to avoid some errors on partitions manipulation
+  * Reduced time to read the project from cloud when update is uploaded
+  * Scheduler: removed error when day of week is not selected
+  * Other minor bugs fixed
+===== 2020/01/26 - rel. 1.1.10.15 =====
+=== Enhancements ===
+  * Added option on KNX variables to decide if the value should be read at startup
+  * Added Philio gateway support for third parties Z-Wave systems
+=== Fixes ===
+  * Fixed scenes triggering with different bit values (0/1)
+  * Fixed group reading at startup for logic module
+  * Fixed value store on logic modules (statistic, counters)
+  * Fixed KNX log on webpages when using KNXNet/IP
+  * Other minor bugs fixed
+===== 2020/01/17 - rel. 1.1.10.14 =====
+=== Enhancements ===
+  * Added functionalities to VIA/VAI access control system
+  * Improved support for relative dimming on Hue Gateway
+=== Fixes ===
+  * Fixed value rounding for Lutron shutter position feedback
+  * Fixed a startup problem that was blocking some server after update to 1.1.10.13
+  * Other minor bugs fixed
+===== 2020/01/10 - rel. 1.1.10.13 =====
+=== Enhancements ===
+  * Added KNXNet/IP gateway and related functionalities
+  * Added support for Thinknx sensors on Envisions
+  * Added IntToDouble conversion in Math Expressions
+  * Added Double data type in Modbus gateway
+  * Added feedbacks for Tutondo Audio matrix
+=== Fixes ===
+  * Fixed reconnection issue for Modbus IP gateway
+  * Fixed connection problems on cloud connection
+  * Fixed a problem on SSDP listener that was causing server block
+  * Improved the internal data saving system
+  * Other minor bugs fixed
 ===== 2019/10/07 - rel. 1.1.10.12 =====
@@ Line 6: / Line 85: @@
   * Added new commands to Thinknx API (refer to dedicated session)
-  * Added support for virtual keypads on Lutron systems
-  * Improved support for thermostat with relative temperature setpoint
-  * Added slider step for thermostat setpoint
-  * Added possibility to invert Fan Manual/Auto values on thermostat
-  * Added support for 2bits DPT2 and 4bits DPT3 on buttons and commands
-  * Added possibility to read back KNX variables value from other KNX devices
-  * Added support for Sonos Spotify cover art
-  * Added support for additional time server
 === Fixes ===